The H.OIL interface meter is a precision instrument used by professionals involved with the monitoring and remediation of groundwater contaminated with oil products. The meter will accurately measure the thickness of LNAPL layers floating on the water table as thin as 1mm. It will also detect and measure sinking layers of DNAPL.
With its slim 5/8" probe, the H.OIL is ideal for wells, piezometers and direct push equipment as narrow as 3/4". Certified intrinsically safe, the meter is suitable for use in storage tanks and areas where explosive gases may be present. The stainless steel probe and a Kynar jacketed, NTS certified tape will withstand attack by hydrocarbons, solvents and other contaminants. The meter is backed by a 10-year limited warranty, and the replaceable probe comes with a 1-year warranty.
With its slim 5/8" probe, the H.OIL is ideal for wells, piezometers and direct push equipment as narrow as 3/4". Certified intrinsically safe, the meter is suitable for use in storage tanks and areas where explosive gases may be present. The stainless steel probe and a Kynar jacketed, NTS certified tape will withstand attack by hydrocarbons, solvents and other contaminants. The meter is backed by a 10-year limited warranty, and the replaceable probe comes with a 1-year warranty.
HD Submersible Camera
HD Submersible Camera
The H.OIL is a portable oil/water interface meter that measures the thickness of DNAPL and LNAPL layers as thin as 1 mm.Features
HD Submersible Camera
H.OIL Electronic Module Specifications:The H.OIL includes a fully potted, fully field removable electronic module. The super bright red LED and buzzer are housed inside this water tight module. The H.OIL works on one 9 volt battery in an easy access battery drawer mounted on the front of the module. This state of the art electronic module has an automatic shut off after 10 minutes of inactivity designed to extend the life of the battery.
H.OIL Probe Specifications:
The H.OIL comes with a standard 5/8 inch (16mm) diameter fully submersible, leak proof probe up to 1000ft/300m. The stainless steel probe is 7 inches (18.5mm) in length and is attached to the tape using a flexible linking device that allows the tape and probe to be protected at this vital junction. The lens at the end of the probe is protected by a stainless steel shield. The emitter at the tip sends a beam of infra red light through the lens to the detector. This process identifies conductive liquid (water) and none conductive liquid (product) to give the appropriate signal. The H.OIL probe is field replaceable.
H.OIL Reel Specifications:
The H.OIL is a well balanced unit. The stand alone, sturdy steel frame is coated in Polyurethane for durability. The vinyl coated carry handle is ergonomically designed for comfort and easier rewinding. The reel flanges and center hub are molded from high strength Nylon running on a stainless steel axle allowing the smooth running of tape up and down the well or borehole. The third hand well casing hanger and tape guide are standard features on all Heron units. (Excluding little dipper). The H.OIL frame includes the grounding cable used for safety in explosive environments.
If you want a more detail specification, feel free to contact Us or email Us for further information.
Greet from Kenzo Bramantyo, Mealabs Environment Indonesia's Representative
HD Submersible Camera
If you want a more detail Accessories, feel free to contact Us or email Us for further information.Greet from Kenzo Bramantyo, Mealabs Environment Indonesia's Representative
HD Submersible Camera
HD Submersible Camera
